45
Display Timestamp:
There are two options: Yes or NO. Select Yes and you can see the system date on the
video,
Display Camera Name:
There are two options: Yes or NO. Select Yes and you can see the device name on
the video.
4.5.3 Snapshot Settings
On this page you can set the snapshot pictures’ image quality and the storage path.
Figure 4.27
Manual Quality
: Low, Middle and High. The higher the quality, the picture will be clearer.
Pictures Save To
: FTP. If you have done FTP and Alarm settings, when alarming, the camera will snap
pictures to the FTP automatically.
Enable timing to capture
To enable capture interval, follow the steps below:
1 Select Enable timing to capture
2 Capture interval:The interval time between two captures.
3 Select the capture time
Capture anytime
Click the black button up the MON, you will see all time range turn red. When something moving in the
detection area at anytime, the camera will capture.
Specify an capture schedule
Click the week day words, the corresponding column will be selected. For example, click TUE, the all
column of TUE turns to red, that means during Tuesday whole day, the camera will capture.
Press the left mouse and drag it on the time boxes, you can select the serial area,
4
Click
Save
button to take effect.
4.5.4 IR LED Schedule
On this page you can set the schedule time for switching IR LED lights. When parameter Mode is set to the