30
5-3
Calibration
Select this item to access calibration menu. For more information about this menu, please
refer to section 7 of this manual.
5-4
Settings
After entering patient data, the device will load default settings automatically. Then user
should select ventilation mode and other parameters settings and confirm the selected mode.
After confirming the settings, the patient ventilation will start.
Figure 5-6 the Ventilator Settings menu
Select a mode from Modes menu and press Accept button. After selecting mode, set relevant
parameters to the selected mode and press ACTIVATE. Available ventilation modes are:
PCV, VCV, PRVC-CMV
P-SIMV, V-SIMV, PRVC-SIMV
PSV, VSV, APRV
The below parameters could be set by the ventilator:
Description
Parameter
Percent of delivered oxygen to patient
2
O
Number of mandatory breaths in the minute.
Rate
