R60 Station
R60 User Manual
Document Number
Version
Date
7000 120-019
A1
2022-08-10
Page 84 (98)
7
MAINTENANCE
By using the Maintenance category, the R60 station firmware and software can be
upgraded. Import, export and restore of the configuration is also supported.
It may be possible to upgrade to a different product variant with extended
functionality by purchasing and installing a different license key. Restrictions may exist
due to national regulation.
The Maintenance category can also be used to download the R60 unit SNMP MIB
definitions and restart the base station.
7.1
Configuration
The current configuration of the base station can be save to a file (Export to file),
restored from a file (Import from file), and restored to factory default values (Restore
defaults).
When changing the configuration the current password must be entered in the
Password field.
During import of configuration, there is an option to skip the network parameters. This
is to allow importing the configuration remotely without risking the network
connection settings changing.
7.2
Restart R60 station
To power cycle the R60 press the Restart button.
7.3
Upgrade firmware/software
To update the R60 firmware and software, simply use the file upload tool on the
Maintenance category page.
To perform a firmware and software upgrade, perform following steps:
1.
Click the Select upgrade file button.
2.
Browse the file structure to find and select the .R60Pkg–file for upload. Click on the
“Open” button (or similar in your language). The upgrade process will start.
3.
The file is uploaded to the R60. A progress bar displays the data transfer.
4.
Once the file is uploaded/written to the device the R60 will reboot and web GUI
will reload. The upgrade process is then finished.
Note! This is the procedure to follow regardless of type of update. The contents of the
.R60Pkg-file controls what is updated.
