8 12 801 443
Saab 9-3 4D M03-
20 Remove the antenna cable from the roof
antenna and remove the antenna.
21 Take the antenna kit, guide the antenna cables
down through the hole in the roof and fit the
antenna.
Tighten the antenna nut.
Tightening torque 2 Nm (1.5 lbf ft)
22
Cars with antenna cable continuing forwards
in the car:
First connect the existing antenna
cable to the violet connector from the antenna.
Take the kit's antenna cable and remove the two
clips intended for fitting in the car roof. Connect
the kit's antenna cable with blue connector to the
blue connector from the antenna. Affix the kit's
antenna cable and the remaining violet connec-
tor to the existing antenna cable up to the split at
the right-hand C-pillar. Use 3 pieces of anti-rattle
tape with one piece to be used for preventing
rattle between the remaining connector and the
roof.
Cars with antenna cable with violet connector
continuing to the parcel shelf:
Remove the
existing antenna cable from the holes in the rear
edge of the roof and fold the antenna cable
down along the right-hand C-pillar. Remove the
antenna cable which runs to the centre of the
parcel shelf, and if a telematics unit is fitted, the
antenna cable must also be removed from it.
Connect the kit's antenna cable to the antenna
and fit the clips to the cable in the holes in the
rear edge of the roof. Guide the antenna cable
down along the C-pillar.
23 Secure the kit's antenna cable to the antenna
amplifier's upper retaining screw.
24 Secure both unused antenna cables and
remaining connectors, if any, together with the
new antenna cable with cable ties to the C-pillar.
Fit anti-rattle tape to the body behind the
remaining connectors in order to prevent rattle.
25
Cars with telematics unit in centre of parcel
shelf:
Connect the antenna cables to the
telematics unit.
F930A356
20
20
21
22
22
23
