S2Konnect S-8180T
13
The LEDs of the S2Konnect S-8180T Unmanaged Switches have the following meaning:
Rear Panel
The rear panel accommodates the plug socket for connection of a standard three-pin power
plug. The S2Konnect Unmanaged Switches automatically adjust their power setting to any
supply voltage in the range of 100 to 240 VAC at 50-60 Hz.
Important Information
Technical Support
If you encounter any problems, read the relevant section of the manual. If you cannot solve
your problems, consult our technical support.
If you contact our technical support engineers, have the following information ready:
• switch type
• configuration of your network
• type of cabling
• system documentation
Our support team can be reached following the instructions on our website.
Please go to www.s2konnect.com, support section.
You will also find the procedure for returning a switch for repair on that section.
S2Konnect cannot accept any returned product without an RMA number on the outer packaging.
The warranty does not apply to products that have been damaged by electrostatic discharge or
inadequate packaging
Figure 7. Rear Panel of the S2Konnect S-8180T
Power consumption: 0,75A @100V
4
i
Marking on
panel
Power
Green
Green
Green
Yellow
Yellow
Off
On
Blinking
On
Blinking
No link established
1000 MBit/s link established, no data is transferred
1000 MBit/s link established, and data is transferred
10 MBit/s link or 100 MBit/s link established, no
data is transferred
10 MBit/s link or 100 MBit/s link established, and
data is transferred
Green
Green
Off
On
Blinking
Operation in half-duplex mode
Operation in full-duplex mode
Collision detected at the port
Off
On
Power off
Power on
SPD/LNK/
ACT
FD/HDX
Color
Status
Description
