RYM
ASKON
®
200-Modbus
Modbus Slave
User Manual
© S+S REGELTECHNIK GMBH
| THURN-UND-TAXIS-STR.22 | 90411 NÜRNBERG | GERMANY | FON +49(0)911 519470 |
Page 15 of 55
2.2.4
Device Settings
The following Table gives an overview of the device settings accessible through the button interface as well as via
Modbus. For the corresponding Modbus registers please refer to Table 18, Table 19 and Table 20 on Page 27 and
following.
Parameter
Value
Default
Your
Setting
Modbus Parity
Odd / Even / None
None
Modbus Baudrate
1.2kB / 2.4kB / 4.8kB / 9.6kB / 19.2kB /
38.4kB / 57.6kB / 115.2kB
57,6kB
Modbus Address
1 - 247
1
Pincode System Administrator
0000 – 9999
(if 0000 the pincode is disabled)
0000
Pincode End User
0000 – 9999
(if 0000 the pincode is disabled)
0000
Color Setting LCD Backlight Red
0% - 100%
100%
Color Setting LCD Backlight Green
0% - 100%
100%
Color Setting LCD Backlight Blue
0% - 100%
100%
Brightness LCD Backlight
0% - 100%
100%
LCD Contrast
0% - 100%
100%
LCD Color Scheme
0 – user (as defined above)
1 – white
2 – red
3 – green
4 – blue
5 – orange
6 – magenta
7 – cyan
0
Time Format
24h / 12h
24h
Show Date
on / off
off
Show Time
on / off
off
Acoustic Feedback (for Touch Buttons) on / off
on
Goto First Display Value (the first
display value will be displayed after 1
minute without inter-action)
on / off
on
Display Auto Shuffle
on / off
off
Display Auto Dim
(lcd brightness will be dimmed after 2
minutes with no interaction)
off / 50% / 10% / 0%
off
Unit System
SI / US
SI
Device Restart
off – if a DOWN-button is pressed the
device will be rebooted manually
-
Table 5: Device settings
