79-15259-00
www.srsmith.com
Page 3 of 7
Basic safety precautions should be observed when operating the SRS-TX-30 product and other
associated equipment.
1. A qualified electrician must install the SRS-TX-30 in accordance to the National and Local
Electrical Codes.
2. The SRS-TX-30 must not be less than 5 feet (3 meters in Canada) from inside edge of pool.
ONLY USE COPPER CONDUCTORS.
3. Do not exceed the maximum ratings of individual components, wiring devices, and current
carrying capacity of conductors.
4. For the bonding, grounding, installing, and wiring of underwater lights to the SRS-TX-30 refer to
Article 680 of the National Electrical Code or Article 68 of the Canadian Electrical Code.
5. This device should never operate equipment that could cause property damage, bodily injury, or
death should it be activated unexpectedly.
6. Never allow children to operate the SRS-TX-30 unsupervised.
IMPORTANT SAFETY INFORMATION
ELECTRICAL RATINGS
Do not exceed the maximum electrical output rating of 30W for the SRS-TX-30. Install a 20Amp,
120VAC GFCI Circuit Breaker for power input. Refer to pages 4 and 5 for installation instructions.
FCC WARNING
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by S.R. Smith could void the user's authority to
operate the equipment.
FUSE REPLACEMENT
To help protect internal parts, the SRS-TX-30 is equipped with a fuse. In the event that the fuse needs
replacement, only use a 250V, 2A Fast-Blow (fast acting) type similar to what is equipped from the
factory. You may also order SR Smith part number 36-15015-00 from your local authorized
distributor.
DANGER – FAILURE TO FOLLOW THESE WARNINGS, INSTRUCTIONS AND THE
OWNER’S MANUAL MAY RESULT IN SERIOUS INJURY OR DEATH
SAVE THESE INSTRUCTIONS!