S.R.Smith MultiLift, Owner'S Manual And Maintenance Instructions, Page: 11 / 30

700-9000 6.14.13 11
multiLift™ Transferring Diagram
TRANSFERRING THE USER TO THE WATER
Once the unit is positioned for use, use the following procedure to transfer to the seat and into the water.
Only persons healthy enough for water activities should use the multiLift™. Users should consult with
their physician to determine if water activities are appropriate for the User:

Check battery level of LiftOperator to ensure charge is adequate for operation (at least 50%
charge recommended).

Use the buttons on the hand control or control unit front panel to raise the seat to the deck
loading/unloading position as shown in Figure 9.

Transfer user onto the seat, ensuring that the user’s weight is centered on seat. Armrests can be
rotated up if necessary (optional US/standard on EU models). If user has a wheelchair, keep the
wheelchair close by for easy retrieval.

Fasten Seat Belt - thread loose end of belt strap through buckle - pull tight - to close - press latch
down on belt material.

Or fasten optional Stability Vest - Position shoulder straps onto shoulders and attach straps to
clips on bottom panel of the Stability Vest - pull shoulder straps tight.

Use the hand control or control unit front panel to lower the seat into the water. The waterproof
hand control can remain connected to seat if user is operating lift.

Unfasten Seat Belt - grasp latch and lift up, pull loose end from latch.

Or unfasten optional Stability Vest - unclip shoulder straps and transfer into water.

When finished, return to the seat, ensuring user’s weight is centered on seat.

Fasten Seat Belt or optional Stability Vest.

Use the buttons on the hand control or control unit front panel to return the seat to the deck
loading/unloading position.

Unfasten Seat Belt or optional Stability Vest.

Transfer off of the seat
Figure 9. Transferring