CompTrol Interface V4.0.x | Issue 21-05-2021 | 1000932 41
Program 2 – temperature setpoint definition with window contact function
8.6 Digital output assignment in program 2
Output
Function
Description
X4a-I
Alarm signal
All alarms registered by the indoor unit, plus internal expansion mod
-
ule alarms, are indicated via the output. In addition, the error code
can be displayed on the 7-segment display (see
X4b-II
Compressor signal/
operating signal
Either a compressor signal or operating signal is displayed, depend-
ing on DIP switch
S2-2
(see “5.3.7 Status signals” on page 29).
X4c-III
Window contact
signal
The window contact signal is emitted as long as the window remains
open.
Table 22: Digital outputs in program 2
Summary of Contents for CompTrol
Page 125: ......
