QUICK START GUIDE
WARNING:
This Quick Start Guide is not a substitute for reading and following the operator’s manual. To reduce the
risk of serious injury, user must read and understand the operator’s manual before using this product.
Go to
www.ryobitools.com
and register your new tool on-line.
For any questions about operating or maintaining your product,
call the RYOBI Help Line! Your product has been fully tested prior
to shipment to ensure your complete satisfaction. Troubleshooting
tips are also available in your operator’s manual.
CALL
1-800-860-4050
www.ry
obitool
s.com
995000019
10-24-16 (REV:01)
Operating the Mower:
1
Test safety interlock system. See page 17 for details.
2
Adjust seat to desired position.
3
Verify battery charge level. Charge if needed.
4
Raise mower deck to highest position.
5
Insert start key and turn to ON position.
6
Release parking brake.
7
Place direction control switch in forward (F) position and drive to desired mowing
location.
8
Stop mower, turn key to OFF, and set parking brake.
9
Lower cutting deck to desired position.
10
Turn start key to ON position and release parking brake.
11
Raise blade engage knob to activate blades, and press accelerator to mow as desired.
To Reverse Mow:
1
Depress brake and bring mower to a complete stop.
2
Push blade engage knob down to turn blades off.
3
Place direction control switch in reverse (R) position.
4
Press reverse mode button.
5
Raise the blade engage knob, slowly press accelerator and reverse mow as
needed.
When Finished:
1
Stop mower on a flat, level surface.
2
Push blade engage knob down to turn blades off.
3
Place direction control switch in neutral (N).
4
Set parking brake.
5
Turn key off.
10
2
11
4
7
3
3
7
1
4 9
1
2
6
2
3
5
1
3
5
8
5
11
5
8
8
4
10
