WARNING
To reduce the risk of injury, user must read and
understand the operator’s manual for their string
trimmer and this instruction sheet. Always wear eye
protection with side shields marked to comply with
ANSI Z87.1 Ensure compatibility and fit before using
this accessory. Do not use this accessory if a part is
damaged or missing.
WARNING
This bladed trimmer head accessory has been
designed and tested for use only with Ryobi brand
18V and 36V battery-powered string trimmers. Use
of this accessory on any other string trimmer or
device could result in serious personal injury.
The bladed trimmer head accessory is suited for cutting
thicker weeds or pulpy stalks only. Do not use for any
other purpose. Never use this accessory to cut woody
brush.
Do not attempt to use the bladed trimmer head
accessory for edging. This will cause premature wear
on the blades.
SPECIFIC SAFETY RULES
■
Keep all bystanders, children, and pets at least 15m
or 50 feet away.
■
Do not operate the trimmer with the bladed trimmer
head accessory unless the guard is firmly secured
in place and in good condition.
■
Wear heavy, long pants, long sleeves, boots, and
gloves. Do not wear loose fitting clothing, short
pants, sandals, or go barefoot. Do not wear jewelry
of any kind.
■
Save these instructions. Refer to them frequently
and use them to instruct others who may use this
product. If you loan someone this product, loan
them these instructions also to prevent misuse of
the product and possible injury.
DESCRIPTIoN
1. Bladed trimmer head accessory
2. Slot
3. Align line in accessory with string head eyelet
4. String head
INSTALLING BLADED TRIMMER HEAD
ACCESSoRY
See Figure 1.
■
Remove the battery pack if installed.
■
Following the instructions in the operator’s manual
for your string trimmer, remove the spool retainer
and spool.
■
Install the bladed trimmer head accessory so the
line on the accessory aligns with the eyelet on the
string head. Make sure the latches click into place
BLADED TRIMMER HEAD ACCESSoRY
RAC1103
1
2
3
4
Figure 1
Figure 2
PROPER OPERATING
POSITION
