background image

SAFETY RULES

attention. 

Following this rule will reduce the risk of serious 

personal injury.

 

When battery pack is not in use, keep it away from 

other metal objects like: paper clips, coins, keys, nails, 

screws, or other small metal objects that can make 

a connection from one terminal to another. 

Shorting 

the battery terminals together may cause sparks, burns, 

or a fire.

 

Always remove battery pack from your tool when you 

are assembling parts, making adjustments, cleaning, 

or when not in use. 

Removing battery pack will prevent 

accidental starting that could cause serious personal 

injury.

 

Always remove battery pack before storing the device.

 

Always wear eye protection with side shields marked 

to comply with ANSI Z87.1. 

Failure to do so could result 

in objects being thrown into your eyes and other possible 

serious injuries.

 

Keep battery pack dry, clean, and free from oil and 

grease. Always use a clean cloth when cleaning. 

Never 

use brake fluids, gasoline, petroleum-based products, or 
any solvents to clean battery pack.

 

Save these instructions. 

Refer to them frequently and 

use them to instruct others who may use this tool. If you 
loan someone this tool, loan them these instructions.

CALIFORNIA PROPOSITION 65

WARNING: 

This product contains chemicals, including lead, known to 

the State of California to cause cancer, birth defects and 

other reproductive harm. 

Wash hands after handling.

WARNING:  

 READ AND UNDERSTAND ALL INSTRUCTIONS. 

Fail-

ure to follow all instructions listed below, may result in 
electric shock, fire and/or serious personal injury. 

 

Battery tools do not have to be plugged into an elec-

trical outlet; therefore, they are always in operating 

condition. Be aware of possible hazards when not 

using your battery tool or when changing accessories. 

Following this rule will reduce the risk of electric shock, 

fire, or serious personal injury.

 

Do not place battery tools or their batteries near fire 

or heat. 

This will reduce the risk of explosion and pos-

sibly injury.

 

Do not crush, drop or damage battery pack. Do not 

use a battery pack or charger that has been dropped 

or received a sharp blow. 

A damaged battery is subject 

to explosion. Properly dispose of a dropped or damaged 

battery immediately.

 

Batteries can explode in the presence of a source 

of ignition, such as a pilot light. 

To reduce the risk of 

serious personal injury, never use any cordless product 

in the presence of open flame. An exploded battery can 

propel debris and chemicals. If exposed, flush with water 

immediately.

 

Do not charge battery tool in a damp or wet location. 

Following this rule will reduce the risk of electric shock.

 

Charge only with Ryobi One+ 18V dual-chemistry 

battery chargers. 

Use of other chargers may result in 

personal injury, fire, or damage.

 

Do not charge in an area of extreme heat or cold. It 

will work best at normal room temperature. 

To reduce 

the risk of serious personal injury, do not store outside 

or in vehicles.

 

Under extreme usage or temperature conditions, bat-

tery leakage may occur. If liquid comes in contact with 

your skin, wash immediately with soap and water. If 

liquid gets into your eyes, flush them with clean water 

for at least 10 minutes, then seek immediate medical 

18 V LITHIUM-ION 
BATTERY PACK

P107/P108 SERIES

To register your RYOBI product, please visit:  

http://register.ryobitools.com
Use this battery pack for RYOBI ONE+ 18V cordless 

products only. Refer to the Operator’s Manual provided with 

product. Always mention the model number above when 

communicating with us regarding this battery pack.

LITHIUM-ION BATTERY PACKS

Lithium-ion batteries deliver fade free power for their entire 
run time. Lithium-ion tools will not gradually lose power due 
to decreasing battery charge. Instead, power from the battery 
pack will drop from full to zero once the full charge has been 
drained from the battery. Once this happens, recharging of 
the battery is required. It is not necessary to drain the battery 
pack completely before recharging. 

BATTERY PROTECTION FEATURES

Lithium-ion battery packs are designed with features that 
protect the lithium-ion cells and maximize battery life. 
If the tool stops during use, release the trigger to reset and 
resume operation. If the tool still does not work, the battery 
needs to be recharged.

COLD WEATHER OPERATION

The lithium-ion battery pack can be used in temperatures 
down to 14°F (-10°C). Put the battery pack on a tool and use 
the tool in a light duty application. After about a minute, the 
pack will warm up and begin operating normally.

OPERATION

P107

P108

Reviews: