TOOL LANYARD
P922
The lanyard snaps into the battery compartment of
most RYOBI
™
ONE+
™
18 volt portable hand-held
tools and provides a convenient method of storage
and transportation, as shown in Figures 1 and 2.
CAUTION:
Remove any blades, bits, or other sharp ob-
jects from the tool before attempting to store
or carry with the plug-in lanyard. Do not use
the lanyard with larger tools such as miter
saws. Use the lanyard only in RYOBI
™
ONE+
™
brand tools. Do not exceed maximum holding
weight of 10 lbs.
Fig. 1
Fig. 2
Fig. 3
A
B
C
C
ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625 • Phone 1-800-525-2579
États-Unis, Téléphone 1-800-525-2579 • USA, Teléfono 1-800-525-2579
www.ryobitools.com
995000309
7-18-17 (REV:02)
A - Battery compartment
B - Lanyard stem
C - Latches
Always mention the model number when
communicating with us regarding this product.
INSTALLING/REMOVING THE
LANYARD
See Figure 3.
To install:
n
Remove the battery pack from the tool.
n
Insert the lanyard stem into the tool’s battery
compartment and press until the latches snap
into place.
To remove:
n
Depress the latches on both sides of the lanyard
to release it from the tool.
