Testing Seat Switch
Seat Switch is Normally Open (N.O.) when no pressure is applied to seat
1. Power Mower OFF
.
2. Set DMM to measure
Resistance
.
3. Disconnect seat switch connectors.
4. Measure continuity when switch is pressed.
5. Measure very high resistance when switch is released.
To Measure the harness
:
1. Turn ON the mower.
2. Set DMM to
DC Volts.
3. Measure 5VDC between the 2 pins on the harness.
Note: this switch operates at 5V.
0-.2 Ohms nominal when pressed
30
