Rydeen BSS1, Owner'S Manual, Page: 10 / 13

9
VIII. Troubleshooting:
NO. Issue Reason Solution
1 LED light does not
work Incorrect connection or pins
not making contact Check the harness and make
sure connection is correct
LED light is broken Replace LED light
2 Opposite LED
indicator Microwave sensor or LED
indicators are plugged in to the
opposite connector Make sure RED is driver side and
YELLOW is passenger side.
3 Buzzer does not work Wrong connection or pins not
making contact
Check the harness and make
sure connection is correct
Defective buzzer speaker Replace buzzer
4
Sensors or GPS does
not work
Sensors or GPS module are
covered by the metal bumper
or other metal Find the best location where the
GPS antenna cannot be blocked
by any metal
5 Unit does not work
after GPS is
connected
Blind spot system does not
trigger the sensors if the speed
is less than 20mph Normal behavior in this case.
The GPS needs to detect
+20mph to trigger the sensors
IX. Technical Support Contact Info.
•
Telephone: 1-877-777-8811 (within USA only)
•
Email: tech1@rydeenmobile.com
•
Web Address: www.rydeenmobile.com