THE BM500S UNIT IS NOT WATERPROOF. AVOID EXPOSING IT TO RAIN OR OTHER
FORMS OF EXCESSIVE MOISTURE. WATER DAMAGE IS NOT COVERED UNDER THE
WARRANTY.
PROFESSIONAL INSTALLATION REQUIRED
THE FOLLOWING INSTRUCTIONS ARE INTENDED FOR RYDEEN PROFESSIONAL
DAMAGE FROM IMPROPER INSTALLATION WILL VOID THE WARRANTY.
WARNINGS
DROPPING YOUR BM500S UNIT OR SUBJECTING IT TO EXCESSIVE SHOCK AND VIBRATIONS
AS THIS MAY CAUSE IT TO MALFUNCTION AND IS NOT COVERED BY WARRANTY.
1. Specification
2. Wiring Diagram
Model BM500S
Screen Size 5-inch LCD
Resolution 800 X 480 Pixels
Display Aspect 4:3 & 16:9
Color RGB
Video System NTSC / PAL
Video Input 2 Sources Input (Video input 1, Back-Up Camera Input 2)
Voltage Input DC 9–16V
Operation Temperature -10°C to + 50°C (14°F to 122°F)
Storage Temperature -30°C to + 70°C (-22°F to 158°F)
English-1
VIDEO IN RCA (V1)
-
Video input (DVD, MP4 etc.) This circuit is secondary and
so it will be over written when Camera video is sensed.
RED
-
12V+ Ignition
Black
-
Chassis Ground
Backup Camera RCA (V2)
-
Video input for camera (priority) This circuit switches
automatically when video is sensed by powering up the reverse camera.
Yellow Video 1
Yellow Video 2
Video
Source
Camera Input
Monitor
3. Monitor Mount Positions
Most popular are Dash Board Mounting (figure 1) and Windshield Mounting (figure 2).
The monitor has a specialized mounting system which allows for multiple mounting options.
Note:
Follow local laws when mounting monitor as these may be specific regulations in your area
limiting placement.
4. Main Functions
1) The BM500S is a 5-Inch rearview monitoring system for small and medium size vehicles.
5. Button Operations
5) Shift vehicle out of reverse and the camera image will disappear and go back
to its previous stage.
3) Shift vehicle into reverse, the camera image will appear on the screen when V2 is
properly connected to a camera.
2) When video source is connected to V1 then turn video source ON and it will
automatically show the image on screen.
4) The monitor displays the rear blind spot to make your drive safe and secure.
English-2
1
2
3
(1) Increase button – For adjusting of
Brightness, Contrast, Language, Rotation, etc.
(3) Decrease button – For adjusting of
Brightness, Contrast, Language, Rotation, etc.
(2) MENU – Access to BRIGHTNESS / CONTRAST /
SATURAION / TINT / MODE / LANGUAGE / RESET
(
Nota: el rango de valores de los ajustes es 0 ~ 100.)