Job No 35381
RYAN 6 DRAWER TALLBOY
Congratulations on your purchase of your
RYAN 6 DRAWER TALLBOY
. The
RYAN
Collection is made in
New Zealand from 100% New Zealand made MDF – an environmentally sound and renewable resource.
If you require any parts or assembly advice or have any questions please go to
www.farmersfurniture.co.nz
or call us direct on
0800 100 858.
WHERE TO ASSEMBLE YOUR TALLBOY
Assemble your Tallboy on a clean and smooth surface, free of anything which may damage the laminated
surface. A carpeted floor is ideal. If assembling on a workbench or table we suggest you cover it with the
carton the unit was packaged in.
Warning
! Never leave hardware parts where children can reach them. Small parts may be a choking
hazard!
PARTS LIST
Please check you have all the parts before beginning to assembling your cabinet. The measurements will
help you identify each part. If any parts are missing or damaged please contact us directly for replacements
and advice. Do not call the store you bought the Tallboy from as they will be unable to help you.
Note: You
will find two pieces of board fitted across the ends of the package. These are for packing purposes only
and are not part of the cabinet.
QTY
PART
MEASUREMENTS
NOTES
1
Top
800 x 396 x 25mm
White laminate finish - Blue mark
1
Base
800 x 396 x 25mm
White laminate finish - Purple mark
1
LH End
1154 x 388 x 25mm White laminate finish both sides - Green mark
1
RH End
1154 x 388 x 25mm White laminate finish both sides - Red mark
1
Division
193 x 364.5 x 15mm White laminate finish on one edge
4
Large Drawer Fronts
728 x 235 x 15mm
White laminate finish
1
LH Small Drawer Front 362.5 x 195 x 15mm White laminate finish - Green mark
1
RH Small Drawer Front 362.5 x 195 x 15mm White laminate finish - Red mark
2
Back Rails
734 x 80 x 15mm
Plain MDF - 2 holes in middle
6
LH Drawer Side
340 x 160 x 12mm
Plain MDF 12mm - Green mark on back edge
6
RH Drawer Side
340 x 160 x 12mm
Plain MDF 12mm - Red mark on back edge
