Assembly Instructions
The Uppingham Log Store
1
Before you commence the assembly process, we recommend that you read these instructions thoroughly beforehand to
familiarise yourself with the assembly procedure and to also check that you have the correct components. If for any reason
you need assistance, you can find our contact details on the final page of these instructions.
We highly recommend that any assembly is carried out on an open flat, level surface if possible and with sufficient space.
Tools required:
No2 Pozidriv screwdriver (or electric driver), 10mm spanner or socket.
Components
30mm screws,
12 x 40mm screws
12 x 45mm screws,
6 x 60mm screws
10 x 70mm screws,
6 x 100mm screws
2 x Dome head
screws
2 x 60mm Coach
screws
1 x Shelf
1 x Base
1 x Roof
1 x Left side panel
1 x Right side panel
1 x Top rail
2 x Eave panels
2 x Framing strip
Rear panel slats
3 x Rear cross
supports
1 x Flashing strip
