Assembly Instructions
Rutland Pergola
1
Before you commence the assembly process we recommend that you read these instructions thoroughly
beforehand to familiarise yourself with the assembly process and to also check that you have the correct
components. If for any reason you need assistance, you can find our contact details on the final page of
these instructions.
We highly recommend that any assembly is carried out on an open flat, level surface if possible with
sufficient space. You will also require the assistance of 2 adults to complete assembly safely.
Please note:
For a free-standing pergola you can remove up to 600mm from the bottom of each post prior to commencing construction
Package contents
Tools required
4 x Posts (6 for 4.2 & 4.8M where applicable)
4 x 500mm diagonal braces (8 for 4.2 & 4.8M where
applicable)
4 x 800mm diagonal braces
2 x Runners
6 x Rafters
12 x 120mm M8 Coach screws
12 (20 for 6 post) x Longer Green Screws
16 (20 for 6 post) x Shorter Green screws
10mm socket drive
Electric screwdriver with No2 Pozidrive bit
Or No2 Pozidrive Screwdriver
Platform or Step ladder
The Rutland Pergola
