RHVS6R_IB_FA_120313
RHVS6R
InstructIons
Congratulations on the purchase of your new Russell Hobbs vacuum rolls. Before using these
items for the first time, please read the instructions carefully and keep it for future reference. Pass
it on if you pass on the items. When using the vacuum rolls, basic safety precautions should
always be followed.
NOTE: All warranty and detailed instructions for this product can be found in the
Instruction booklet for the Russell Hobbs Seal Fresh Vacuum Sealer RHVS1
IMPORTANT: Only the Seal Fresh Vacuum Sealer RHVS1 supplied by Russell Hobbs
can be used with the vacuum rolls RHVS6R.
ABOUT YOUR SEAL FRESH VACUUM ROLLS
You can create a bag using the rolls provided & you can determine the length of the bag, to suit
your vacuum sealing task.
CAUTION: Do not touch the sealing element, it becomes hot.
1.
Place the unit on a flat, stable surface allowing sufficient room to work
2.
Plug the power cord into a wall power outlet and switch the outlet on.
3.
Using scissors, cut the required length of material from the bag roll for the item to be
packaged plus an additional 8cm for vacuuming and sealing.
4.
Lay one end of the bag flat on top of the sealing strip, but not into the vacuum chamber.
5.
Lower the lid and lock closed by pressing firmly on both front corners. Ensure the locking tabs
on both sides click into place.
6.
Press the Seal button to seal one end of the bag. Sealing is complete once the Seal LED
indicator goes out.
7.
Press the lid release buttons to open the cover and remove the bag from the appliance. The
bag is now ready for you to add items and start vacuum sealing.
CARE AND CLEANING
IMPORTANT: DO NOT re-use bags after storing raw meats, raw fish or greasy
foods. Do not re-use bags that have been microwaved or boiled.
1.
Wash bags in warm water with a mild dishwashing soap.
2.
Bags can also be washed in the dishwasher. Turn the bags completely inside out and spread
them flat over top rack of dishwasher, so the entire surface is exposed.
3.
Dry thoroughly before re-using