background image

19. This appliance is not suitable for outdoor use. Do not use this appliance for anything 

other than its intended use. 

20. DO NOT carry the appliance by the power cord. 

21. Do not leave this appliance unattended during use. Always unplug the unit when not 

in use or before cleaning. 

22. Always operate the appliance on a smooth, even, stable surface. Do not place the 

unit on a hot surface. 

23. Ensure that the switch is in the “Off” position after each use. 

24. The manufacturer does not accept responsibility for any damage or injury caused by 

improper or incorrect use, or for repairs carried out by unauthorised personnel. 

25. In case of technical problems, switch off the machine and do not attempt to repair it 

yourself. Return the appliance to an authorised service facility for examination, 

adjustment or repair. Always insist on the use of original spare parts. Failure to 

comply with the above mentioned pre-cautions and instructions, could affect the safe 

operation of this machine. 

26. This appliance is equipped with a thermostat that will cycle OFF if the temperature 

exceeds the comfort level.  When overheated i.e by covering the air slots,  the 

appliance switches off automatically and switches back on again after cooling off for 

a few minutes.  

27. Clean the appliance with a dry or a moist cloth, making sure that you pull out the 

mains plug first .  

28. Worn-out appliances should be made unusable immediately by pulling out the mains 

plug,  and cutting through the connection cord and removing the plug.  Then dispose 

of the appliance properly. 

 
 
 

OPERATING YOUR HAIRDRYER 

SPEED & HEAT SWITCHES 

Ensure the control setting is in the “0” position when the hairdryer is plugged into the 
mains.  Select the required speed and heat setting (as described in table). 

GENERAL 

Wash and condition your hair as desired, then ‘rough-dry’ your hair.  Add mousse or light 
setting agents evenly through the hair for hair protection and a long lasting style.  If 
desired attach the concentrator nozzle.  Start styling your hair at the back and work 
forwards.  After using the attachment allow it to cool first before removing it from the 
hairdryer. 

 

4

Summary of Contents for RHHD25








Reviews: