EN
11
5. Push the wheels (9) on each end of the wheel axle (10).
6. Position the washers (13) and locking nuts on each end of the wheel axle and tighten
both wheel nuts using a key.
NOTE. The wheels must be mounted correctly to allow the nuts to tighten at each end of
the axle.
7. Press the wheel covers to cover the ends of the axles.
8. Lock the final frame (20) at 2 feet (19 and 20) using fixed screws (16).
Connect the support with the shredder's body.
6. COMMISSIONING
Start: Make sure the switch position is OFF. Connect the shredder to the socket using an
extension cord, if necessary. Press the ROP / OFF switch on "PORNIT" to start.
Stop:Press the PORNIT / OPRIT switch to "OPRIT" to turn off the shredder.
ATTENTION: The shredder will not work if the lock button of
the hopper is weakened.
Bunker lock button
Summary of Contents for ST100
