Ruris RX300S, Manual

Page: 106 / 200

EN
15
START: For engines equipped with a priming pump
Start by actuation (demaror): Primer the machineburetor by actuating the priming pump
located on the air filter cover (3-4 actuations). Pull the emergency stop handle with your
left hand and stick it to the guide handle. Grasp the starter handle with your right hand
and pull gently until you feel resistance. Then pull constantly to start the engine. After the
engine has started, let it reach maximum speed, after which you can start working.
START: For engines equipped with thermal shock
Pull the emergency stop handle with your left hand and stick it to the guide handle. Grasp
the starter handle with your right hand and pull gently until you feel resistance. Shoot
constantly to start the engine. After the engine has started, let it reach maximum speed,
after which you can start working.
START: For manual shock engines
Start by actuation (demaror): Pull the emergency stop handle with
your left hand and stick it to the guide handle and position the
shock lever in the closed position and apply the accelerator lever
to the maximum (if equipped). Grasp the starter handle with your right hand and pull
gently until you feel it is resisting, then constantly to start the engine, then position the
shock lever in the open position (working). After the engine has started, let it reach
maximum speed, after which you can use it in progress.
AUTOMATIC START (turnkey): If the machine is equipped and with automatic start, the
start will be done by actuating the key following the start-up steps depending on the
engine equipment.
8.2 STOP
2) Release the safety brake control lever (engine-stop).
Note: Stop (for machines equipped with an acceleration lever, the shutdown will be done
after reducing the engine speed to a minimum, after which release the motor-stop safety
brake control handle).