Ruris RM280, Manual

Page: 130 / 251

EN
6
2.2 SYMBOLS ON THE MACHINE
For safe operation and maintenance, the symbols are embossed on the product. Operate
with caution according to instructions.
(a) Point of refuelling "mixed fuel"
Position : next to the fuel tank opening
(b) Oil supply point for chain
Position: next to the oil supply tank
(c) Stopping the engine
Switching the knob to the "O" position stops the engine immediately
(d) Operating the choke lever
Pull the choke lever, the flap will close.
By pushing the choke lever, the flap will open.
Position: behind and to the right of the rear handle.
(e) Oil pump flow adjustment
It is done by positioning the oil pump adjusting
screw in one of the 2 positions as follows:
- MAX. position, the oil flow will increase
- MIN. position, the oil flow will decrease
(f). The screw next to the "H" symbol is the screw for adjusting the maximum
speed (if there is a symbol).
the screw below the "L" symbol is the screw for adjusting the minimum speed
(if there is a symbol).
the screw above the 'T' symbol is the idle speed screw (if there is one).
Position : the adjustment screws are located above the petrol tank.