Main Support no.: +370 5 2045030
Polish Support no.: +48 22 2092532
Ukrainian Support no.: +380 947 107319
11
www.ruptela.com
Note
It is recommended to keep the number of opening procedures to the minimum.
4.2
Connecting the USB cable
Connect the USB cable to the device (
see the picture on
the right
). The cable can be connected in only one way,
be careful not to damage the plug. Connect the other end
to your computer.
Before starting the configuration procedure of the device,
make sure that it is connected to an external power
supply.
4.3
Inserting a SIM card
If you received the device without a SIM card, place your
own SIM card into the device as shown in the picture
below. The microchip must be facing down.
4.4
12 Pin cable
Connect the 12 Pin cable plug to the Micro-Fit slot on
the device (
see the picture on the right
). The cable can
be connected only in one way.
