R&D department
2018/08/01
1.2
Informational messages, alerts
1.2.1
Driving rule violation, accident (FM-Pro3 only)
SMS message is sent if one of the following SMS alerts are configured:
overspeeding, harsh braking, extreme
braking, harsh acceleration, DIN1, DIN2, DIN3, DIN4
. Purpose of this message is to inform about the driving rule
violations or accidents.
Message format:
[violation type/accident type] (
count
)
…
...
[violation type/accident type] (
count
)
count
– number of accidents or driving rule violations between messages.
Message may contain
single
or
multiple
alerts.
Violation/accident types
:
•
Over speeding;
•
Extreme braking;
•
Harsh braking;
•
Harsh acceleration;
•
DIN1;
•
DIN2;
•
DIN3;
•
DIN4.
Examples:
Overspeeding (5)
DIN1 (2)
Harsh braking (8)
1.2.2
SMS alerts with date & time (FM4 devices only)
SMS message can be sent if one of the following SMS alerts is configured:
overspeeding, power supply disconnecting,
DIN1, DIN2, DIN3, DIN4 (ignition)
. Purpose of this message is to inform when these events were triggered. Date & time
is GMT. To receive SMS alerts, "SMS Alert Number” must be configured.
“SMS Alert Number” can be configured via FM configurator. In the main configurator window, locate the “Authorized
numbers” section and click “Options. This will open the “Numbers window”. The second input field in this window is the
“SMS alert number”, the user must enter a number which will receive the SMS alerts.
Notes
When inputting the number, the “+” symbol should be replaced with “00”.
I/O parameters must be properly configured to be able to send SMS alerts, this means one of the previously mentioned
I/O parameters must be enabled as shown:
•
DIN1, DIN2, DIN3 or Ignition (DIN4) – “Event on” set to
On Change
;
40
