RUNZEL PRO-290, Manual

Page: 14 / 36

Runzel
PRO-290 © R
LC
Grupp 2018 (ENG) Page 14 of 36
hours. The process for clean the scale is as below:
• Remove the water tank, wash the scale at water base
with clean water.
• Open the water tank base knob, dump mixture in the
water tank, wash with clean water.
• After clean the scale, if you think there is still scale,
please repeat the above process.
Trouble shooting
Problem Cause Solution
The security device does
not work
One of the circuits has
fault, the plug is loose,
the fuse burned, the
LED of supply source is
extinguished
Check and maintain by
specialized technician
A noise originates pipe of
steam but the produced
steam is weak
The pipe is twisted
below level to iron
Raise the steam pipe
(residual water in top
returns into the device)
Spray head is leaked The head is broken, or
the ironing is vertical
Replace the spray head.
Move from top down to
operate
Hooking connection of
steam pipe is leaked
The cushion can be
damaged itself with
the aging, the junction
interface loosen itself
Replace the cushion. Rotate
the junction of steam pipe
tightly
Water spilled out water
tank
Water tank is broken or
has a hole
Replace the water tank
Steam is weak The power source is
lower or deposits can
obstruct the arrival pipe
Add a stabilizer of power
source. Use a cleaning
respecting the environment
Water tank is in distortion Over heated water is
put. Or other chemical
element is put
Continue to use.
Replace the water tank
No steam but the indicator
is lighted
The steam creator is
broken.
The internal electric
component is broken
Call a specialized technician
to do an examination
Proper disposal of the devices
This EC symbol means that these goods may not be
disposed as a household waste. Obsolete devices feature
valuable materials that may be reused. They shall be
furnished for reprocessing to avoid hazardous impact
on the environment and health through uncontrolled
disposal of wastes.