RUNZEL PRO-290, Manual

Page: 11 / 36

Page 11 of 36
Runzel
PRO-290 © R
LC
Grupp 2018 (ENG)
Safety devices function
This product adopts the two security protection device,
users safer and more confident
Thermostats: in fever, the thermostat control the
fever in the minimum temperature between work and
effectively prevent the high risks caused by
Hot melt implement when a thermostat which causes
fever, the temperature rose to a temperature, thermal
melt implement will be timely melt in time, to cut off
the automatic protection to prevent danger.
Installation before use
• Pleas read the instruction carefully.
• Remove all the package.
• Do not power on or open before finish the install.
• Appliance knock down assembly picture
• Put the telescopic pole insert the base.
• Make sure the knob tight after insert the body.
• Pull the little telescopic pole, knob 90 degree, telescopic
open.
• Open the telescopic buckle, pull the Aluminum pole.
• Keep the buckle tight.
• Put the steam brush on the brush fix base.
Water tank with water
• Will hang on a machine on the flat ground and took
out the army opened the cover, fasten the lid with
clockwise. as in fig.
• To the case with water, water from the army covered
with water. (as in figure if you water it is very high
degrees of hardness of water resources management
consult, if possible please use the following of the
mixed distillation water or soften: 50% of the water
with fountain 50% distillation water or soften or drink
water is pure water.
• It up with water after the army, with a clean towel to
clean the toilet outside the water tank on the well-being
of will. (in figs)
• Do not fill hot water.
Iron instruction
• Fill the water from the water filled cover, open the cover
of water tank, fill the water into water tank.