Runco Video Xtreme CineWide VX-3000d, Operation Manual

Page: 57 / 114

Installation
VX-3000 Installation/Operation Manual 43
PRE
L
IMINAR
Y
3.9
Primary Lens
Adjustments The VX-3000 gives you a great deal of control over the picture size, position and focus.
Focus and Zoom To focus the projected image, grasp the lens by the outer
ring and rotate it.
To make the picture smaller (zoom out) or larger (zoom in),
move the zoom tab in the appropriate direction.
Focus and Zoom –
VX-3000 Ultra The VX-3000 Ultra has motorized focus and zoom
controls. To access them, use the two, white
buttons on the remote control to the left of the
LENS button.
To focus the projected image, press the FOCUS
button, then use the left- and right-arrow buttons
( , ) to adjust the focus.
To make the picture smaller (zoom out), press the ZOOM button, then use the left-arrow
( ) button. To enlarge the picture (zoom in), press the ZOOM button, then use the
right-arrow ( ) button.
Lens Shift Vertical Lens Shift: To shift the projected image vertically, press the LENS button, then
use the up and/or down-arrow ( , ) buttons.
3.10
Changing the OSD
Language
The VX-3000 OSD language is initially set to English, but can also display the menus in
French, Spanish, Italian or German. To change the OSD language:
1. Press MENU .
2. Select Installation from the Main Menu and press ENTER .
3. Select Language from the Installation Menu.
4. Press or to select the desired language. (The change takes effect immediately.)
Zoom
in
Focus
Zoom
out
FOCUS LENS ZOOM
LENS
(ZOOM) (FOCUS)