Runco Video Xtreme CineWide VX-3000d Operation Manual Download Page 18

Page: 18 / 114

Introduction

VX-3000 Installation/Operation Manual

PRE

IMINAR

Key Features and Benefits

The VX-3000 offers these key features and benefits:

• Native Resolution: 1920 x 1080 (16:9 Native Aspect Ratio)

• DLP system using SuperOnyx™ Digital Micromirror Device (DMD)

• 6-segment color wheel produces wide dynamic range and rich grayscale

• Picture in Picture function allows you to display two inputs on the screen at the same

time

• Two (2) HDMI Inputs with High-bandwidth Digital Content Protection (HDCP)

• HDTV Compatible

• Reflectance Volume Regulation (RVR™) provides for infinitely variable adjustment of the

light path through the optics, enabling the perfect balance of black and white levels for
each individual installation

Parts List

Your VX-3000 is shipped with the following items. If any items are missing or damaged,
please contact your Runco dealer or Runco Customer Service at (800) 23-RUNCO.

• VX-3000 DLP Home Theater Projector

• Remote Control Unit and two (2), AAA-size batteries

• AC Power Cord, 8.2 feet (2.5 meters)

• Source Connection Cables, 9.8 feet (3.0 meters):

• Component Video

• HDMI to HDMI

• VX-3000 Installation/Operation Manual (this document)

Optional Accessories:

• Ceiling mount kit (part number 956-0099-00)

• CineWide™ technology (fixed, secondary anamorphic lens)

• CineWide™ with AutoScope™ system (secondary anamorphic lens and motorized

mount)

➤

Summary of Contents for Video Xtreme CineWide VX-3000d



















































































































Search results

Summary of Contents for Video Xtreme CineWide VX-3000d

Reviews:

Related manuals for Video Xtreme CineWide VX-3000d

Brands by name

Popular brands

Runco Video Xtreme CineWide VX-3000d, Operation Manual

Search results

Summary of Contents for Video Xtreme CineWide VX-3000d

Reviews:

Related manuals for Video Xtreme CineWide VX-3000d

Brands by name

Popular brands