Runco QuantumColor CineWide with AutoScope Q-1500d, Installation & Operation Manual, Page: 73 / 148

Installation
Q-1500d Series Installation/Operation Manual 57
PRE
L
IMINAR
Y
1. Remove the two Yaw/X Adjustment Levers and Washers ( 5 ) from the bottom of the
Anamorphic Lens Holder ( 2 ).
2. Place the Anamorphic Lens Holder on top of (or under, if the projector is inverted) the
CineWide Base Plate. Position the bracket so that the slots at the bottom of the lens
holder are perpendicular to the corresponding slots on the base plate.
3. Secure the Anamorphic Lens Holder to the plate using the Hex Bolts/Washers ( 4 ) and
Yaw/X Adjustment Levers that you removed in Step 1.
4. Use the Height/Pitch Adjustment Knobs ( 3 ) to attach the Anamorphic Lenses ( 1 ) to
the Anamorphic Lens Holder.
Q-1500d/CineWide or Q-1500d/CineWide with Auto S cope - S ha s ta Anamorphic
Len s In s tallation: The Q-1500d “Shasta” Anamorphic lens mount kit consists of
everything shown in Figure 3-26.
Figure 3-26. S ha s ta Anamorphic Len s Mounting A ss embly - Exploded View
To avoid clipping the corners of the image, position the anamorphic
lenses as close as possible to the primary lenses.
Tip
*Use included
L-wrench to tighten
S ha s ta Anamorphic
Len s e s (2x)
Yaw/X-adju s tment Lever
and Wa s her (2x)
Anamorphic Len s
Holder
2
1
4-40 S et S crew (4x)* 3
¼-20 Button-head
Height Adju
s tment
S crew (8x)*
5
¼-20 Button-head
Pitch Adju
s tment
S crew (4x)*
4
7
¼-20 Hex Bolt
and Wa
s her (2x)
6
AutoScope Lens
Motor Carriage Plate
(shown here) or Fi x ed
CineWide Base Plate