Runco QuantumColor CineWide with AutoScope Q-1500d, Installation & Operation Manual, Page: 61 / 148

Installation
Q-1500d Series Installation/Operation Manual 45
PRE
L
IMINAR
Y
Ethernet Network Connection: Use a standard, Category 5 network cable with an
RJ-45 plug to connect a network hub, router or gateway to the Ethernet port on the
Primary DHD Controller; see Figure 3-19.
For more information about configuring and using this connection, refer to Network on
page 88.
Figure 3-19. Ethernet Network Connection to Primary DHD Controller
H
HDMI 4
HDMI 3
HDMI Out
Audio Only
HDMI Out
To Display
Ethernet
PC / Control
RS232
Display Control
IR
H
HDMI 4
HDMI 3
HDMI Out
Audio Only
HDMI Out
To Display
PC / Control
RS232
Display Control
IR
1 8
to Ethernet
Hub, Router
or Gateway
1 Tran s mit Data +
2 Tran s mit Data -
3 Receive Data +
6 Receive Data -