Runco QuantumColor CineWide with AutoScope Q-1500d, Installation & Operation Manual, Page: 33 / 148

System Overview
Q-1500d Series Installation/Operation Manual 17
PRE
L
IMINAR
Y
1. RUNCO ICON
Lights blue to indicate that the Brightness Acceleration Engine is on or powering up.
2. MAIN POWER S WITCH
Disconnects or applies power to the Brightness Acceleration Engine.
3. POWER INPUT (100 to 240 VAC)
Connect the Brightness Acceleration Engine to power here.
4. HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 In (Digital)
HDCP-compliant digital video inputs for connecting an HDMI or DVI source.
5. Component / S CART In (3 x RCA connector s )
SD/HD input for connecting SDTV, EDTV or HDTV component video sources. Also
provides RGB input for SCART RGBS sources.
6. Video 1 / Video 2 / Video 3 In
Standard, composite video inputs for connecting a VCR, camcorder or other
composite video source. The Video 1 input also provides composite sync input for
SCART RGBS sources.
7. PRIMARY / S ECONDARY Analog Out (5 x BNC s )
Two outputs (five BNCs per output) that connect to the HD2 input on the Primary and
Secondary DHD Controllers.
8. PRIMARY / S ECONDARY Compo s ite Video Out (RCA connector)
Two standard, composite video outputs that connect to the Composite 1 video input
on the Primary and Secondary DHD Controllers.
9. PRIMARY / S ECONDARY HDMI Out
Two HDCP-compliant digital video outputs that connect to the HDMI 1 input on the
Primary and Secondary DHD Controllers. The Primary HDMI output also provides a
CEC channel for control messages.
10. HD1 / HD2 In (5 x Analog BNC s )
Two inputs (five BNCs per input) for connecting standard-definition (SD = 480i/576i),
enhanced-definition (ED = 480p/576p) or high-definition (HD = 720p/1080i/1080p)
component video sources, or RGBHV sources such as personal computers.
11. U S B
A standard, USB Series “B” connection to a personal computer, for performing
software upgrades and other service procedures.