Runco QuantumColor CineWide with AutoScope Q-1500d, Installation & Operation Manual, Page: 31 / 148

System Overview
Q-1500d Series Installation/Operation Manual 15
PRE
L
IMINAR
Y
2.3
Secondary DHD
Controller The Secondary DHD Controller provides a video signal and OSD menu to the secondary
optical engine of the projector.
Figure 2-6 shows the Secondary DHD Controller front and rear panel.
Figure 2-6. S econdary DHD Controller Front and Rear Panel s
1. RUNCO ICON
Lights blue to indicate that the controller is on or powering up.
2. MAIN POWER S WITCH
Disconnects or applies power to the DHD Controller.
3. U S B
A standard, USB Series “B” connection to a personal computer, for performing
software upgrades and other service procedures.
4. R S -232 (To Acce ss ory Box)
A male, 9-pin D-sub connector for interfacing with the Primary DHD Controller. (Use a
“null-modem” serial cable for this connection.)
5. Di s play Control
Connect this to the RS-232 input on the secondary (bottom) optical engine on the
Q-1500d projector.
6. POWER INPUT (100 to 240 VAC)
Connect the DHD Controller to power here.
1
A B C D E
H
DHD4
Secondary
Pr
R
Y
G Pb
B
Pr
R
H V
HD2
T
Video 1 Video 2
Video 3 Pr Pb
HDMI 1 HDMI 3
F G HDMI Out
To Display
RS232
TRIGGERS
USB RS-232
1 2
Display Control
IR
Do not connect video sources or control systems to this box.
TRIGGERS
1 2
RS232
IR
Video 3
Pr
R
Pr Pb
G B R
2
7 6
5 4 3
8 10
2
9