Runco QuantumColor CineWide with AutoScope Q-1500d, Installation & Operation Manual, Page: 30 / 148

System Overview
14 Q-1500d Series Installation/Operation Manual
PRE
L
IMINAR
Y
The Video 2 and Video 3 inputs are not used with the Q-1500d. Connect your
Composite video sources to the Brightness Acceleration Engine.
10. HDMI 1 Input (Digital)
Connect the HDMI 1 input to the Primary HDMI output on the Brightness Acceleration
Engine.
The HDMI 2, HDMI 3 and HDMI 4 inputs are not used with the Q-1500d.
Connect your HDMI sources to the Brightness Acceleration Engine.
11. Ethernet
A female RJ-45 connector for wired network communications.
12. HDMI Out (Audio Only)
Connect this output to an audio control system to pass through HDMI audio.
13. HDMI Out (To Di s play)
Connect this to the HDMI input on the primary (top) optical engine on the Q-1500d
projector.
14. R S -232 (PC / Control)
A female, 9-pin D-sub connector for interfacing with a PC or automation/control
system.
The DHD Controller does not transmit HDMI CEC control
messages from the “HDMI Audio Out” connector.
Note