Runco QuantumColor CineWide with AutoScope Q-1500d, Installation & Operation Manual, Page: 123 / 148

External Control
Q-1500d Series Installation/Operation Manual 107
PRE
L
IMINAR
Y
Error Code ERR R No 0 No 38 = Secondary Display Fan 3 Fail-
ure
39 = Secondary Display Fan 4 Fail-
ure
40 = Secondary Display Fan 5 Fail-
ure
41 = Secondary Display Fan 6 Fail-
ure
42 = Secondary Display Fan 7 Fail-
ure
43 = Secondary Display Fan 8 Fail-
ure
44 = Secondary Display DMD Fail-
ure
45 = Secondary Display Lamp
Strike Failure
46 = Secondary Display Lamp
Went Out
47 = Secondary Display Ballast
UART Failure
48 = Secondary Display GPIO Fail-
ure
49 = Secondary Display Lamp
Door Open
50 = Secondary Display Processor
Failure
51 = Secondary Display Hardware
I2C Failure
52 = Secondary Display Software
I2C Failure
53 = Secondary Display Lamp
Error
54 = Secondary Display Commu-
nication Error
55 = BAE Fan Failure
Film Mode FLM R/W No 0 1 No 0 = Off; 1 = On
Fan 1 Speed FN1 R/W Yes 0 255 No
Fan 2 Speed FN2 R/W Yes 0 255 No
Firmware Upgrade FWU W No N/A N/A No Action will be performed on any
setting value
Gamma Advanced GMA R/W Yes 0 20 No
Gamma Mode GMM R/W No 0 1 No 0 = Simple
1 = Advanced
Gamma Simple GMS R/W No 0 6 No 0 = 2.0
1 = 1.8
2 = 2.2
3 = 2.35
4 = 2.5
Table 6-1. S erial Command s (continued)
S etting
Command
Code
Read/
Write
Inc/
Dec Min
Value
Max
Value
S tring? Note s