Runco LightStyle LS-12HBd, Installation & Operation Manual, Page: 98 / 152

Operation
82 LightStyle™ LS-12HBd Installation/Operation Manual
PRE
L
IMINAR
Y
Press MENU to exit test pattern mode.
Grey Bar s
Use this pattern when making
brightness, contrast or white
balance (gain/offset) adjustments.
Full White
Use this pattern when measuring
or adjusting brightness, contrast or
white balance (gain/offset).
Primary Alignment
S econdary
Alignment
Dual Alignment
Use this pattern when aligning the
output from the projector’s
primary or secondary optical
engines (refer to
Adjusting the
Image Geometry on page 52).
Select Dual Alignment to have
both optical engines output this
pattern.
3D
Use these patterns to confirm that
the left-eye and right eye images
are being processed correctly. To
do this, close your right eye while
viewing this test pattern through
the 3D glasses. If you see only the
left-eye portion, then the system is
correctly configured for 3D.
Normally, the Primary scaler
processes the left-eye image; the
Secondary, the right-eye image.
To change this, use the Reverse
Eyes control in the 3D Processing
menu (refer to
Reverse Eyes on
page 71).
Table 4-4. Te s t Pattern s and Their S ugge s ted U s age (continued)
Pattern S ugge s ted U s age