Operation
LightStyle™ LS-12HBd Installation/Operation Manual
65
PRE
L
IMINAR
Y
Contra
s
t:
On your external test pattern source, select a stepped, gray-bar pattern like the
one shown in Figure 4-3.
Figure 4-3. Typical Gray Bar Pattern for Adju
s
ting Contra
s
t
Select Contrast and press
ENTER
. Adjust the contrast to a point just below which the
white rectangle starts to increase in size.
Color
S
aturation:
On your external test pattern source, select a color bar pattern like the
one shown in Figure 4-4.
Figure 4-4. Typical Color Bar Pattern for Adju
s
ting Color
S
aturation and Tint
1. Press the
MENU
button on the remote control or Dimension Digital Controller front
panel.
2. Select Service from the Main Menu and press
ENTER
.
3. Enter the Service menu passcode.
4. Select Display Device from the Service menu and press
ENTER
.
Brightness and contrast controls are interactive. A change to one
may require a subtle change to the other in order to achieve the
optimum setting.
Note
gray
yellow
cyan
gr
een
magenta
re
d
blue
Summary of Contents for LightStyle LS-12HBd
Page 2: ......
Page 72: ...Installation 56 LightStyle LS 12HBd Installation Operation Manual P R E L I M I N A R Y Notes...
Page 151: ......