Runco LightStyle LS-12HBd, Installation & Operation Manual, Page: 50 / 152

Installation
34 LightStyle™ LS-12HBd Installation/Operation Manual
PRE
L
IMINAR
Y
Adjusting the Projection
Angle
If the LS-12HBd is ceiling-mounted and the screen is significantly lower than the projector,
you can tilt the projector at a slight angle by adjusting the ceiling mount.
The projector can be rotated (side-to-side) up to 360 degrees and mounted without it
affecting performance. However, to ensure optimal performance of the lamp, limit the
front-to-back tilt of the projector to ±20 degrees; see Figure 3-6.
Figure 3-6. Mounting Angle Range s (Front-to-Back and S ide-to- S ide)
If you do this, you may need to shift the image using the on-screen display (OSD) controls,
to compensate. For detailed instructions, refer to
Primary Lens Adjustments: Focus,
Zoom and Position on page 51.
➤
± 360º
± 20º