Runco LightStyle LS-12HBd, Installation & Operation Manual, Page: 46 / 152

Installation
30 LightStyle™ LS-12HBd Installation/Operation Manual
PRE
L
IMINAR
Y
In s talling the Anamorphic Len s Tran s port A ss embly: After installing the Transport
Assembly Attachment Plate and Ceiling Mount Plate, proceed as follows to install the
Anamorphic Lens Transport Assembly.
1. Do not use the mounting screws provided with the ceiling
mounting kit. Use only the hardware provided with the Transport
Assembly Attachment plate.
2. DO NOT OVER-TIGHTEN THE SCREWS.
Caution
S crew, Phillip s PH,
M4 x 30mm
Loc k Wa s her
Flat Wa s her
5/8" Nylon S pacer
Ceiling Mount Plate
Attachment Plate
Projector (bottom)
Hardware for Attachment Plate
and Ceiling Mount Plate (4 Places):
Attachment Points
for Security Hoo k s