Runco LightStyle LS-12HBd, Installation & Operation Manual, Page: 26 / 152

System Overview
10 LightStyle™ LS-12HBd Installation/Operation Manual
PRE
L
IMINAR
Y
2.3
DC-300 Dimension
Digital Controller The Dimension Digital Controller provides “left-eye” and “right-eye” video signals and the
OSD menu to the projector. It controls the other system components in response to user
input via the following interfaces:
• Front-panel keypad
• IR remote control unit
• HDMI CEC messages
• RS-232 serial commands
• Ethernet
Front Panel Layout Figure 2-5 shows the controls and indicators on the Dimension Digital Controller front
panel; the paragraphs that follow describe them.
Figure 2-5. Dimen s ion Digital Controller Front Panel
1. RUNCO ICON
Lights blue to indicate that the controller is on or powering up.
2. IR S EN S OR
Receives IR commands from the remote control.
3. VACUUM FLUORE S CENT DI S PLAY
Can be used instead of the On-Screen Display (OSD). Displays currently-selected
menu or – if no menu is selected – the connected display device model, current
source, input resolution and aspect ratio/screen.
4. ON/ S TANDBY BUTTON
Press once to toggle from standby mode to on mode. Press it again to return to
standby mode. For a discrete on or off command, you can use the direct access
buttons on the remote control.
5. LEFT BUTTON
Used to direct-select inputs or move the menu cursor left in the OSD. When no menu
is present on-screen, the
LEFT button toggles through the different sources, in this
order:
DisplayPort - HDMI 8 - HDMI 7 - HDMI 6 - HDMI 5 - HDMI 4 - HDMI 3 - HDMI 2 -
HDMI 1 - SCART - HD 2 - HD 1 - Component - Composite 3 - Composite 2 -
Composite 1
➤
ratio
ratio
i
n
p
u
t
standby
m
e
n
u
i
n
p
u
t
enter
HDMI 1
16:9/1 1080i/60
3 1
9 10 11
6 5 4 8 7 2
LS-12HBd