Runco LightStyle LS-12HBd, Installation & Operation Manual, Page: 25 / 152

System Overview
LightStyle™ LS-12HBd Installation/Operation Manual 9
PRE
L
IMINAR
Y
2.2
LS-12HBd Rear Panel Figure 2-4 shows the LS-12HBd rear panel.
Figure 2-4. L S -12HBd Rear Panel
1. R S 232 (Control)
A female, 9-pin D-sub connector that provides a serial communication link to the
Dimension Digital Controller, via its
Pri. Di s play Control output (see Figure 2-6).
2. 3D LED
Lights green when the projector is displaying 3D content.
3. PRIMARY VIDEO INPUT
Connect the HDMI Out To Primary Di s play connector from the Dimension Digital
Controller to this input (see Figure 2-6).
4. PRIMARY S OURCE LED
Lights amber when the projector detects a valid primary video signal from the
Dimension Digital Controller.
5. S ECONDARY VIDEO INPUT
Connect the HDMI Out To S ec. Di s play connector from the Dimension Digital
Controller to this input (see Figure 2-6).
6. S ECONDARY S OURCE LED
Lights amber when the projector detects a valid secondary video signal from the
Dimension Digital Controller.
7. POWER INPUT (100 to 240 VAC)
Connect the LS-12HBd to power here.
RS232
RS232
PRIMARY
PRIMARY
SECONDARY
SECONDARY
3D Sync Out
3D Sync Out
3D Sync Out
3D Sync Out
1 2 3 4 6 5 7