RUMBLE HOG RH7500, Operation Manual

Page: 111 / 164

111
Section 4 - lubrication & maintenance
ITEM# COMPONENT DESCRIPTION ITEM# COMPONENT DESCRIPTION
1. Skip Cylinders 5. Gauge Wheel Bearings (Auto Lube)
2. Main Bearing 6. Gauge Wheel Bearings (Auto Lube)
3. Motor Mount Bearing 7. Trim Wheel Bearings
4. 9” Bearing 8. Main Shaft Bearing
Rumble Hog Lubrication Chart 1
2
4.2 lubrication & Grease point locations
3
1
5
6
4
3
6
5
2
1
7
8
WARNING
USE ONLY POLYREX EM GREASE IN ECCENTRIC BEARINGS.
T H E U S E O F A N Y O T H E R G R E A S E W I L L R E S U LT I N
LIQUEFIED OR HARDENED GREASE THAT WILL CAUSE
BEARING FAILURE.
WARNING
G R E A S E P U R G E S S K I P, G A U G E A N D T R I M W H E E L
BEARINGS OF TAR AND OTHER MATERIAL THAT WILL
CAUSE THE BEARINGS TO SEIZE WHEN THEY COOL AFTER
OPERATION, PERMANENTLY DAMAGING THE BEARINGS.
GREASE SKIP GAUGE AND TRIM WHEEL BEARINGS 3 TIMES
DAILEY. PUMP GREASE INTO EACH BEARING UNTIL GREASE
EXITS EACH SIDE AND THE ENTIRE CIRCUMFERENCE OF THE
BEARINGS TO PURGE THEM OF TAR AND OTHER MATERIALS.