6. Fully extend the fiberglass top
half of the left pole. The arms
should be slanted in the same
direction, as shown above.
1
2
3
4
5
6
1. Unfold the frame’s middle
cross beam. The frame will lay flat
on a rubber base.
2. Unfold the legs, making sure
that the locking button is fully
extended.
3. Bring up the left arm. Lock it
into place using the base pin.
Make sure the pin is fully inserted
into the base.
4. On the left arm, fully extended
the fiberglass top half of the arm.
Lock into place with the cotter
pin.
5. Bring up the right arm, but
do
not extend it all the way up.
Rest
the base pin on the groove that is
half way up the bottom base
plate.
Check out our video instructions at:
/ RukketSports
