pipes together (Fig. A)
1. Join the two slightly bent
1
2
3
4
5
6
7
8
9
A
B
X
1
2
3
4
5
6
7
8
9
1. Join two straight Pipes
together. (Fig. A)
Then attach both end legs
(Fig. B)
A
B
1
2
3
A
B
1
A
2
3
B
2. Install two lower Black Rods
with Coupling Tubes up, into
angled Pipes.
3. Thread Sleeve over Black
Rod. Make sure logo is not
upside down.
4. Repeat with Sleeve pocket
over other Black Rod.
5. Take Black Rod and slide
into lower rod’s Coupling Tube.
6. Hold Black Rod while pulling
Sleeve up. Loop white cord
over rod top.
7. Take the last Black Rod and
slide into Rod Coupling Tube.
8. Grip Black Rod and pull
Sleeve up. Loop Cord over pole
top.
9. Take lower Elastic Loops and
place under stud on both end legs.
10. Wrap velcro around frame. (X
in Fig. 8)
X
Check out our video instructions at:
/ RukketSports
1. Join two slightly bent
pipes together (Fig. A)
Then attach both end legs
(Fig. B)
3. Thread a fiberglass pole through one
of the net's sleeves making sure the net
is right side up (white loops at the top
corners and black bungees at the bottom
corners).
2. Install the two lower fiberglass
poles, with coupling tubes at the
top, into the angled pipes on the
metal base.
4. Repeat for the other side.
5. Insert an upper fiberglass pole into
one of the lower pole's coupling tube.
The metal knob should be at the top.
6. Gripping the assembled fiberglass
pole, slide the net's sleeve up the pole
and loop the white rope onto the metal
knob on top.
7. Insert the remaining upper fiberglass
pole into the remaining lower pole.
8. Grip the pole and slide the sleeve up
before looping the white rope around the
metal pole top.
9. Loop the black elastic bungees over
the metal posts located on the outside of
each end leg. 10. Wrap the velcro
around the frame (X in Fig. 8).
SOFTBALL SOCK NET
ASSEMBLY INSTRUCTIONS
QUESTIONS? GIVE US A CALL! (1-855)-478-5538
V1
RukketSports
Our video instructions provide the best guidance for setting up your Sock It! Baseball/Softball Net.
They can be viewed online at
