Hardware Installation and Reference Guide Product Overview
The asset management label is next to the switch status indicator of the switch back panel. The label is movable and
can be withdrawn from the device. Users can mark the information such as asset name, category, code and registration
date on the label which helps to improve asset management accuracy and efficiency.
Figure 1-4 Asset Management Label of the RG-S6220-48XS6QXS-H
External Ports
The RG-S6220-48XS6QXS-H provides the following ports:
Universal serial bus (USB) port: This port can connect with USB memory to save logs, host versions, warnings
and other diagnostic messages. Therefore, it is more convenient to upgrade the software version of the switch on
line and save the log information.
MiniUSB port: This port can be used as a serial port after PC is installed with the required driver. For the driver
installation guide, refer to Appendix F.
To protect the data and avoid device damage, use qualified USB flash disks of good brands. At the same time, the
local USB port is compatible with most of the USB controllers except some USB flash disks.
RG-S6220-H series switches supports debugging, configuration, maintenance, management and host software
uploading of both Console and MiniUSB ports. But the Console port and the MiniUSB port cannot take effect in the
meanwhile.
Console port: Use RS-232 interface electrical level and standard RJ45 connector. This interface is connected with
the serial port of terminal PC to perform system debugging, configuration, maintenance, management, and host
software uploading.
MGMT port: This is an out-band Ethernet port, which uses standard RJ45 connector. This interface is connected
with Ethernet port of a PC to perform program downloading.
SFP+ port: There are 48 10G SFP+ ports, which support optical modules and DAC copper cables, and are
compatible with 1000BASE-X.
QSFP+ port: There are six 40G QSFP+ ports, which support optical modules and DAC copper cables. This port
can work in 4x10G mode.
Indicator
