Hardware Installation and Reference Guide Preparation before Installation
2.1.1 Installation Safety
Keep the chassis clean and dust-free.
Do not place the device in walking areas.
Do not wear loose clothes, ornaments or any other things that may be hooked by the chassis during the
installation and maintenance.
Turn off all power supplies and unplug all power cords and cables before the installation or the dismantling.
2.1.2 Removal Safety
Avoid frequent removals after the device is installed.
Turn off all power supplies and unplug all power cords and cables before the installation or the dismantling.
When removing the device, pay attention to the balance and avoid hurting legs and feet or straining the back.
When the device is being removed, do not hold the power supply handle or the fan handle for these parts are not
designed for bearing the entire weight of the device. It will cause damage to the device or to your body if you hold
these parts when removing the device.
To reduce the weight of the chassis during the removal, dismantle the extension module, fan module and the
power supply module first.
Install and operate the device in places where removing is restricted.
2.1.3 Electric Safety
Observe local regulations and specifications when electric operations are performed. Relevant operators must be
qualified.
Carefully check any potential danger in the working area, such as ungrounded power supply, unreliable grounding
of the power supply, and damp/wet ground.
Find out the location of the emergency power supply switch in the room before installation. First cut off the power
supply in the case of an accident.
Be sure to make a careful check before you shut down the power supply.
Do not place the device in a damp location. Do not let any liquid enter the chassis.
The leakage current cannot be greater than
0.5mA at 120VAC or 1.0mA at 240VAC.
Any nonstandard and inaccurate electrical operation can cause accidents such as fires or electrical attacks, thus
causing severe, or even fatal damages to human bodies and the devices.
Direct or indirect touch through a wet object on high-voltage and mains supply can bring a fatal danger.
2.1.4 Electrostatic Discharge Damage Precautions
The RG-S6220-H designing gives a great consideration to prevent electrostatic discharge damage and adopts multiple
measures. But if the electrostatic exceeds certain limit, it can still cause great damages to the circuitry and the device.
In networks connected by the RG-S6220-H, the major sources of electrostatic induction are outdoor high voltage
transmission cables, lightening, indoor floor materials and the machine structure.
