Hardware Installation and Reference Guide Product Overview
Notes:
1. Power supply module slot
2. Fan module slot
3. Asset management label
4. Grounding connector
Asset Management Label
The asset management label is in the lower right corner of the switch back panel. The label is movable and can be
withdrawn from the device. Users can mark the information such as asset name, category, code and registration date
on the label which helps to improve asset management accuracy and efficiency.
Figure 1-15 Asset Management Label of the RG-S6220-32QXS-H
External Interface
The RG-S6220-32QXS-H provides the following interfaces:
Universal serial bus (USB) port: This port can connect with USB memory to save logs, host versions, warnings
and other diagnostic messages. Therefore, it is more convenient to upgrade the software version of the switch on
line and save the log information.
MiniUSB port: This port can be used as a serial port. A driver should be installed in the terminal PC. For more
information about the installation of drivers, please refer to Appendix F.
To protect the data and avoid device damage, use qualified USB flash disks of good brands. At the same time, the
local USB port is compatible with most of the USB controllers except some USB flash disks.
RG-S6220-H series switches support system debugging, configuration, maintenance, management and host
software uploading of both Console and MiniUSB ports. But the Console port and the MiniUSB port cannot take
effect in the meanwhile.
Console port: Use RS-232 interface electrical level and standard RJ45 connector. This interface is connected with
the serial port of terminal PC to perform system debugging, configuration, maintenance, management, and host
software uploading.
MGMT port: This is an out-band Ethernet port, which uses standard RJ45 connector. This port is connected with
Ethernet port of a PC to perform program downloading.
QSFP+ port: There are 32 40G QSFP+ ports, which support optical modules and DAC. Apart from ports 1F-4F
and 29F-32F, all such ports can be split into four 10G QSFP+ ports via software.
Indicator
