Figure 2-1 Correctly move the RG-S12010 switch
Figure 2-2 Correctly move the RG-S12006 switch
Preparation Before Installation
Temperature and Humidity Requirements
Operating temperature
0ºC–50ºC
Storage temperature
–40ºC to 70ºC
Relative humidity
10%–90%
Preventing Electrostatic Discharge Damage
To prevent ESD damage, you must pay attention to the following:
Proper grounding of the switch and floor.
Dust prevention measures are taken in the room.
An appropriate humidity is maintained.
Do not wear loose clothes or any other things that may be caught by the chassis during
installation and maintenance, for instance, necklace and ring.
Do not let any clothes touch a circuit board. An antistatic wrist strap can only prevent static
electricity from human damaging the circuit board, but cannot prevent any static electricity
