Figure 4-2 Ventilation of RG-S12006
Checking Before Installation
Before powering on RG-S12000, make sure that:
The fan meets the current requirements. For details, refer to
Fan
.
The power supply is suitable. For details, refer to
Power Supply
.
The power supply is fastened with screws properly.
Do not power on the system or do maintenance when the system is powered on by one person.
Make sure that there is no potential risk in the operating area, for example, the power is not
grounded; the power is not grounded reliably; or the ground is wet.
Keep the switch away from wet or liquid.
Be aware of the emergent power switch in the room. Once an accident occurs, shut down the
power switch.
Make sure that all the power systems are powered off when necessary.
Make sure that power cables are closely connected to the power module.
Make sure that power cables are long enough.
Make sure whether the rated current of power bank is larger than 16A and the power bank is
grounded well.
Each power module is supplied with power by a power socket.
Make sure that the blank panels are installed in the slots which are inserted with line cards or
management boards for the purpose of system heat dissipation.
